The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.

What wood is best for decks?

What is the Best Wood for Outdoor Decks?

• Cedar. Using Cedar for decks is one of the most popular options because of it’s durability and resistance to moisture.
• Redwood. Redwood is another western soft wood that is frequently used in outdoor deck builds.
• Pressure Treated Wood.
• Tropical Hardwoods.
• Composite Wood.

Is pressure treated wood good for decks?

In all, pressure treated wood, like anything, has its good qualities and its not-so-good qualities. But, with excellent features such as its resistant to fungal decay and termites as well as its attractive price-point, pressure treated wood is an outstanding choice to use for the construction of your deck.

Should I use deck boards or 2×6?

2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.

How thick should deck boards be?

NOTE: Standard boards are often called a 5/4 board when referring to traditional lumber, which means the actual thickness is typically somewhere between 1” and 1 ¼”. Thicker boards are often called a 2 x 6 when referring to traditional lumber, which means the actual thickness is somewhere between 1.2” and 1.5”.

What is the most cost effective decking material?

What’s the cheapest decking material? The cheapest decking material is usually pressure-treated pine, which can cost as little as $2 to $3 per square foot. There are solid wood and composite options that run $4 to $5 per square foot. Keep in mind that you get what you pay for.

Which lasts longer Cedar or pressure treated wood?

Cedar is stronger and more durable than pressure-treated lumber. Pressure-treated lumber can warp and weather within a few years if left untreated, while cedar is more capable of naturally keeping its shape.

What is the life expectancy of a wood deck?

Traditional wood deck: Typically 10 to 15 years. Capped composite: Industry experts agree these boards can last 25 to 30+ years. Capped polymer (the best of the best): Because of its superior material composition, capped polymer boards can last much longer, potentially 50 years or more.

How long will a pressure treated wood deck last?

It depends on the climate, the type of wood, its uses, and how well it’s maintained. While pressure treated poles can stay up to 40 years without any signs of rot or decay, decks and flooring might only last around 10 years.

Should deck joists be 2×6 or 2×8?

In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.

Should deck boards have a gap?

Proper wood deck board spacing should have at least a 1/8 inch gap after the decking has dried out. If you install your wood or treated deck boards while they are still wet boards, then they should be attached without a gap between them.

What is the most common deck board size?

The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.

Can I use 2×8 for deck boards?

Q: Can I use 2×8 treated lumber as deck boards? A: No, that’s a not a good idea. Lumber wider than 6 inches should not be used as a flat surface. Wide, flat boards have a tendency to pool rain water, which can lead to cupping problems.

How far apart should the joists be on a deck?

Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.

How do you stagger deck boards?

A common method for staggering a deck is to start the first row with a full plank, then cut one-third of the next row’s first board off the end. The row after that has an additional one-third cut off and then repeat when you get back to a full board.