Categories Recipe

Readers ask: How do you make a plane in Solidworks 2018?

Creating Planes

  1. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane.
  2. In the PropertyManager, select an entity for First Reference.
  3. Select a Second Reference and Third Reference as necessary to define the plane.
  4. Click.

How do you create a plane in Solidworks?

Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.

How do you make a new plane?

Paper Airplane DIY

  1. Fold the paper in half horizontally.
  2. Unfold the paper and fold each of the top corners into the center line.
  3. Fold the peak down to meet the edge of the previous fold.
  4. Fold the upper sides into the center line.
  5. Fold the top edge 1/2” away from you.
  6. Fold the plane in half towards you.

How do you create an offset plane in Solidworks?

Click. You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane. To change the names for construction planes in the current document, click-pause-click the plane’s name in the FeatureManager design tree and type a new name.

You might be interested:  Quick Answer: What are the different kinds of kitchen knives?

How do you make a plane in Solidworks 2017?

Creating Planes

  1. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane.
  2. In the PropertyManager, select an entity for First Reference.
  3. Select a Second Reference and Third Reference as necessary to define the plane.
  4. Click.

How do I create a plane at an angle to another plane?

The trick is simple: select a plane as the first reference and then select the multiple plane option BEFORE you pick the axis. Then select the angle option and type in 10 degrees and 36 in the ‘Number of planes to create ‘. This creates all 36 instantly!

How do you create a datum plane in Solidworks?

Select the Insert> Reference Geometry > Plane from the top menu options. Option 3: With our default planes shown, holding CRTL, selecting the screen boarder of an existing plane and dragging a new plane into the model space.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *