Categories Recipe

## Question: How is drapery stack calculated?

Round up to the nearest inch. For example, a 48-inch-wide window opening divided by 6 equals 8 inches for the rod extensions on each side of the window. If your curtain is a single panel that pulls back to one side or the other, divide the window width by 3 to calculate the stack back.

## How is stack width calculated?

Calculate the stack back for an unlined curtain, constructed of light to medium-weight fabric as 10 percent of the width. For example, if the window is 100 inches wide, add 10 percent for a width of 110 inches.

## What is stack in drapery?

Stack back is the amount of space the curtains occupy when in the fully open position. Curtain fullness refers to how many ripples or folds are present when the curtain is closed.

## How much do you overlap curtains?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

You might be interested:  FAQ: How to cook wings in the oven?

## How is drapery fullness calculated?

Drape Measurements Essentially, you should use twice as much fabric as you’d use if it were a flat curtain. By doubling the width of a flat curtain, you achieve 100% fullness. This means that if you’re covering an area of 50 inches, you’ll need 100 inches of fabric to get proper fullness.

## What is a ripple fold drapery?

WHAT ARE RIPPLEFOLD CURTAINS? Ripple fold style curtains are curtains that have a consistent s- curve rippling across the span of the track. The ripples are created by carriers corded together to create that consistent wave. These styles are seen often in hospitality installations as hotels and banquet rooms.

## What is stack width?

The effective width of the stack is 4 bytes/32 bits. If you are coding for an x64 CPU, it is 8 bytes wide, but you asked about IA32.

## How wide should curtain panels be?

How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.

## What is the typical allowance for overlap in draw draperies?

The overlap, which is 2″ for each panel, ensures privacy and light control. One-way panels do not overlap. The PLEAT-TO is the finished width of a drapery, or the total width a drapery is “pleated to” including its returns and overlaps.

## How far should drapery rod extend past window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

You might be interested:  Question: How to cook spaghetti in instant pot?

## How much wider Should a curtain rod be than the window?

Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.

## What is the standard fullness for drapes?

A typical fullness measurement is “2-1/2 times” (often abbreviated as 2-1/2 x). This means the drapery panel will be made with fabric 2-1/2 times as wide as the finished panel width or window width.

## What is fullness ratio for curtains?

Fullness Ratio is the ratio of the width of the curtain before pleating to its finished width when pleated or gathered. The higher the fullness ratio the more gathered and heavier the curtains will be. We recommend a Fullness Ratio of 1.9 to 2.2 for a double pleated curtain.

## How much fullness do you need for sheer curtains?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

(нет голосов)