1. Bend the wire hanger into a circle.
2. Bend the hook of the hanger so that it is at a 90 degree angle with the hoop.
3. Cut the cardboard to the size and shape of your liking.
4. Decorate the hoop and backboard to your liking.
5. Tape the hoop to the backboard.
6. Attach a net to the basketball rim (optional).

•

What can you use if you don’t have a basketball hoop?

Wire Coat Hanger All you need is a spare wire coat hanger. Undo the wrap around the hook, bend the wire out (keeping the hook) and form a circle. Now you have a ring you take anywhere and hook onto anything around the house – your very own DIY basketball hoop!

How do you make an outdoor basketball hoop?

Building a Regulation Outdoor Basketball Hoop. Cut a piece of plywood to 72 in (180 cm) x 42 in (110 cm). Use clamps to securely attach a piece of plywood to a work bench or saw horses and measure out the regulation-size backboard. Mark the dimensions using a large ruler and a sharpie, then use a saw to cut the plywood

How do I make my portable basketball hoop stable?

Use anchors and ratchet strap (the best option) This is probably the best thing you can do to anchor down portable basketball hoop. You basically take two anchors and hammer them down on two opposite sides of a portable hoop. Then you thread through the strap, attach it to one end and tighten it up as you mean it.

What is the size of a basketball hoop?

All basketball rims (hoops) are 18 inches (46 cm) in diameter. The inner rectangle on the backboard is 24 inches (61 cm) wide by 18 inches (46 cm) tall, and helps a shooter determine the proper aim and banking for either a layup or distance shot.

How do you put a basketball hoop on a tree?

The best option is to build a removable frame for the hoop and backboard that will grasp the tree in a vice-like clamp without damaging it.

1. Cut the 2-by-4 treated lumber into two boards, 36 inches long, using a miter saw.
2. Attach one board to the back of the backboard.

Can you use plexiglass for a basketball backboard?

Plexiglass is a weather resistant alternative to traditional plywood basketball backboards. A see-through backboard for the hoop is both practical and attractive. A regulation size backboard can be inexpensive to make, but does require the right tools and patience.

How do you hang a basketball ring on the wall?

If you are attaching it directly to a wall, use the pre-drilled holes in the backboard to drill it into the wall. Screws must be inserted into the holes and tightened using a drill. A screwdriver may be substituted for a drill. Attach the net to the basketball hoop.