Double vanities are generally between 60” and 72” in width, but you will find some as small as 48”.
- 1 How wide should a vanity be for 2 sinks?
- 2 What is the minimum width for a double vanity?
- 3 How wide should bathroom vanity be?
- 4 Does a double vanity add value?
- 5 Is a double vanity worth it?
- 6 What is the smallest vanity for a double sink?
- 7 How far apart are double sinks?
- 8 How do you pick the right size vanity?
- 9 How much should a vanity top overhang?
- 10 What is best height for bathroom vanity?
- 11 What remodel adds the most value?
- 12 How important is a double vanity for resale?
- 13 Can two sinks share a drain?
How wide should a vanity be for 2 sinks?
Typically, the best size for a double vanity is 72 inches wide. This is large enough to comfortably accommodate both sinks while still moderate enough to fit in most bathrooms. Additionally, 72-inch vanities usually provide adequate storage space.
What is the minimum width for a double vanity?
If you do the math, that calls for a minimum of 60 inches, or 5 feet of wall space. And 5 feet really isn’t enough for comfortable, simultaneous use of both lavs. Six feet is a real-world comfort minimum, with 36 inches between lav centers.
How wide should bathroom vanity be?
The most common bathroom vanity widths are 24, 30, 36, 48, 60, and 72 inches. For single-sink cabinets, the average bathroom vanity width range is between 30 and 48 inches. For double vanities, a width range of 60 to 72 inches is standard.
Does a double vanity add value?
Double vanities also add value to your home. While one sink is typical and essential, two sinks make your home more desirable and attractive to potential buyers. Often, the choice to buy one home over another is how practical the bathroom is; a double vanity definitely adds to that.
Is a double vanity worth it?
Double bathroom vanities offer all the benefits of a vanity times two, providing space for two individuals to get ready each morning, less stress about sharing the bathroom, and more convenience and flexibility overall.
What is the smallest vanity for a double sink?
Usually, double sink vanities require a minimum width of 48 inches but are more common in standard sizes of 54 or 60 inches wide.
How far apart are double sinks?
The centers of the two drains should be no farther than 30 inches apart. And if the vanity tops are going to be installed at different heights, the new sink should be no more than 6 inches higher than the existing sink.
How do you pick the right size vanity?
If you’re purchasing a vanity without a top, you’ll also need to measure for the countertop. Measure the width and depth of the vanity cabinet. The vanity top should be 1 inch wider and 1 inch deeper than the vanity cabinet. Be sure to include allowances for fillers if you plan on using them.
How much should a vanity top overhang?
The standard overhang for a bathroom countertop is about 1 to 1 1/2 inches from the cabinet. A bathroom countertop that is surrounded by walls is typically flush with the boundaries and has no overhang except the inch or more in the front.
What is best height for bathroom vanity?
The standard height for a bathroom vanity is about 30 to 32 inches. On the other hand, a comfort height bathroom vanity matches kitchen countertop height at 36 inches. Most adults prefer comfort height vanities, though the standard height is easier for children.
What remodel adds the most value?
Here are the six home remodeling projects that deliver the highest returns:
- Garage door replacement. Average cost: $3,907.
- Manufactured stone veneer. Average cost: $10,386.
- Minor kitchen remodel. Average cost: $26,214.
- Fiber-cement siding. Average cost: $19,626.
- Vinyl windows. Average cost: $19,385.
- Vinyl siding.
How important is a double vanity for resale?
As a general rule, if you have a large enough space for a double vanity that will still allow for adequate counter and storage space then certainly two sinks would be most desirable both for practical use as well as for resale value.
In most cases, you can easily adapt the supply and drain pipes to accommodate two sinks, using tee fittings, special valves, extension pipes and hoses. You may have to vent each sink separately, though, depending on your local plumbing codes.