Made Out Of: The acrylics are made from… you guessed it acrylic resins and/or polymers that are basically like a thin Elmers glue. It resembles paint, in a way, but a very high quality one, that has sand in it, to give the finish a little more definition.

What is acrylic stucco?

Acrylic stucco is made up of acrylic resins and/or polymers, sand and crushed quartz- sand being the only shared material between acrylic and traditional stucco. Acrylic stucco actually resembles gritty paint. It’s also known as elastomeric stucco, synthetic stucco or even exterior insulation and finish system (EIFS).

What is the difference between acrylic and synthetic stucco?

Traditional stucco requires a wire mesh underlay to stick to the home’s exterior whereas acrylic stucco is a multilayered exterior coating with a foam insulation board, synthetic stucco first coat, fiberglass mesh, and synthetic top coat. Acrylic stucco repels water while classic stucco absorbs water.

Is acrylic better than stucco?

Acrylic is a great choice, especially for CA residents. Acrylic stucco is essentially an exterior grade paint mixed with acrylic and crushed quartz. This is just to give you an idea of what it is like, the material itself. It is rubber like and minimizes cracking a lot better than conventional stucco.

How can you tell the difference between real stucco and synthetic stucco?

Synthetic Stucco (EIFS) It’s more flexible than traditional stucco and consists of a moisture barrier, foam insulation, cement basecoat, reinforcing fiberglass mesh and an acrylic finish. Synthetic stucco is 80% lighter than traditional hard coat and more durable because it contains fiberglass.

How thick is acrylic stucco?

Apply the Acrylic Stucco Finish Coat slightly thicker than the largest aggregate size. Work the material to a uniform thickness of 1 / 16 “. Texture the Acrylic Stucco Finish Coat as desired.

Is acrylic stucco breathable?

It is applied in three layers over a wire or wood lath and finished with an acrylic-polymer top coat. Rock-hard but also permeable, stucco provides excellent insulation, durability, and breathability.

Why is synthetic stucco bad?

What is the problem? Synthetic stucco is commonly referred to as Exterior Insulating and Finish System (EIFS). EIFS (usually pronounced “eefs”) constructed homes, however, have a dark cloud surrounding them— allegations of water accumulation and damage resulting in mold growth.

Can you put acrylic stucco over regular stucco?

You can apply new stucco on top of old, so long as the proper measures are taken to ensure the integrity of the new layer. Check the existing stucco for structural integrity. Keep the nozzle at least two feet from the surface of the stucco area. Allow 48 to 72 hours for the stucco to dry.

How long does acrylic stucco take to dry?

I usually recommend a MINIMUM of 7 days for stucco to cure before painting but a 14 day wait is better and 30 days is the “standard” cure time. After 7 days, the new stucco will have a significant portion of it’s strength gained and a lot of the shrinkage cracking will have occurred or started to occur.

What kind of stucco is best?

Pure cement stucco is rather hard, and if a stable mesh base, known as lath, is not applied, the stucco will crack. Traditional stucco is excellent because of its versatility. The exterior can be smoothed or roughened. When applied professionally and maintained, stucco can about 50 years.

What is faux stucco?

Faux stucco, on the other hand, is made up of synthetic products and is widely used decoratively to create a grainy, plaster-like finish on exterior or interior walls. While traditional stucco is non-insulating, specific kinds of faux stucco can be made and used for exterior insulation as well.

Is EIFS the same as synthetic stucco?

What’s The Difference Between EIFS and Traditional Stucco? A traditional hard-coat stucco exterior system is extremely strong and durable because it essentially covers your home with a layer of rock. Barrier EIFS on the other hand, uses a multi-layer “synthetic” stucco that is much softer than traditional stucco.

How do I know if I have EIFS stucco?

The easiest way to identify synthetic stucco (EIFS) is by touching the material with your bare hand. When you touch the wall where the stucco is installed, it will feel like plastic. You can also knock gently on the wall. If it sounds hollow and thin, you have EIFS on your home.