Engineering controls protect workers by removing hazardous conditions or by placing a barrier between the worker and the hazard. Examples include local exhaust ventilation to capture and remove airborne emissions or machine guards to shield the worker.

What are four examples of common engineering controls?

Examples include self-capping syringe needles, ventilation systems such as a fume hood, sound-dampening materials to reduce noise levels, safety interlocks, and radiation shielding.

What is an example of an engineering control OSHA?

It further states that “(e)ngineering controls shall be examined and maintained or replaced on a regular schedule to ensure their effectiveness.” Some examples of engineering controls used to control the hazards of needlesticks include needleless intravenous (IV) systems, “self-sheathing,” and/or “self-blunting”

What are the 5 types of engineering controls?

Traditionally, a hierarchy of controls has been used as a means of determining how to implement feasible and effective controls, which typically include elimination, substitution, engineering controls, administrative controls, and personal protective equipment.

What is an example of an engineering control quizlet?

Terms in this set (4) Avoiding splashing, spraying and splattering droplets of blood or body fluids when performing all procedures. Removing and disposing of soiled protective clothing ASAP. Cleaning and disinfecting all equipment and work surfaces soiled by blood and other body fluids. Using good hand hygiene.

Are gloves an engineering control?

Environmental Health & Safety The next few pages deal primarily with “engineering controls”, i.e. fume hoods, gas cabinets, glove boxes, etc. Engineering controls are considered the “first line of defense” in protecting workers. In contrast, personal protective equipment is generally considered the final defense.

What are 2 types of engineering controls?

Engineering controls consist of a variety of methods for minimizing hazards, including process control, enclosure and isolation, and ventilation. Process controls involve changing the way that a job activity is performed in order to reduce risk.

What are common engineering controls?

The basic types of engineering controls are:

• Process control.
• Enclosure and/or isolation of emission source.
• Ventilation.

Is PPE considered an engineering control?

Engineering controls are favored over administrative and personal protective equipment (PPE) for controlling existing worker exposures in the workplace because they are designed to remove the hazard at the source, before it comes in contact with the worker.

Is handwashing an engineering control?

Engineering controls are devices that isolate or remove the bloodborne pathogen hazard from the workplace (OSHA, 2019a). Hand washing, that sends pathogens on the worker’s hands down the drain and out of the workplace.

What are 3 engineering controls?

Engineering controls consist of a variety of methods for minimizing hazards, including process control, enclosure and isolation, and ventilation.

What are examples of engineering controls that protect healthcare staff?

These controls are sharps disposal containers, self-sheathing needles, safermedical devices such as sharps with engineered sharps injury protections, andneedleless systems.

What are examples of engineering?

Engineering is all about using scientific principles to create structures and machines. Examples include bridges, pharmaceuticals, vehicles, airplanes, factory machines, buildings, roads, robots, and tunnels. It is the application of mathematics and science to solve problems.

What is an example of an engineering control for silica?

The National Institute for Occupational Safety and Health (NIOSH) found that exposure could be reduced through the use of engineering controls, including the use of local exhaust ventilation to capture dust at its source and the use of water sprays to suppress dust where it is produced.

What is an example of an administrative control?

Administrative controls are training, procedure, policy, or shift designs that lessen the threat of a hazard to an individual. Other examples include hours of service regulations for commercial vehicle operators, Safety signage for hazards, and regular maintenance of equipment.

Which is the following is an example of an engineering control forcing function?

Which is the following is an example of an engineering control (forcing function)? Change the design of equipment so that cords can’t connect to the wrong machine (i.e., they won’t fit ).