8 Genius Ways to Hide Every Wire in Your Home

1. Hook Cords to the Back of Your Furniture.
2. Corral Them Behind the Couch.
3. Hide TV Wires in Plain Sight.
4. Run TV Wires Behind the Wall.
5. Tuck Cord Chaos Into Tubing.
6. Slip Them Into a Drawer.
7. Snake Them Through Baseboard Accessories.
8. Stash Wires and Routers In “Books”

What should I hide cables with?

How to Hide Your TV Wires Without Cutting Into Your Walls

1. Use Cord Clips to Hide Your Wires Behind a TV Stand.
2. Use Zip Ties to Keep Your Wires from Touching the Floor.
3. Use a Cable Management Box.
4. Use a Wall Cord Raceway Kit.
5. Hide Your TV Wires Inside a Baseboard Raceway.
6. Use a Fabric Cord Concealer.

How do you hide cables in plain sight?

Place Cables Behind the Wall One of the advantages is that you gain extra space for storage rather than taking up room for a device. Mounted televisions can appear very sleek but can look tacky when wires are dangling from it. Instead, drill two holes in the wall -one behind the television, and one next to an outlet.

How can I hide my wall cables?

Place a decorative box on a shelf just under the cables. Gather the cables together and close the box to hide them. You can also cut a small hole in either side of the box and feed the cables through this hole to the wall outlet to conceal them. Hang pictures or paintings over the cables.

How can I hide a lot of cords on my computer?

How To Hide Computer Cords On A Desk In The Middle Of The Room

1. Wall mount power bar with USB and three outlets.
2. Clear cable clips.
3. Clear zip ties.
4. Velcro One Wrap roll.

How do you cover exposed wires without electrical tape?

5 Substitutes for Electrical Tape

1. Duct Tape. Duct tape is a common substitution for electrical tape.
2. Wire Connectors. Plastic wire connectors are also a suitable replacement for electrical tape.
3. Heat Shrink Tubing.
4. Friction Tape.
5. Dielectric Spray.
6. Related Articles.

How do you cover exposed wires?

Electrical tape is the simplest method of making electric wires safe. You also use tape on capped live electric wires as an extra precaution. Tapes can be used on loose live wires that do not fit the cap. You can simply use tape over the live wire to fit into the cap.

How do you make cords look neat?

Power strips and surge protectors are must-have items for keeping cords tidy. Consider mounting them using double-sided mounting tape or Velcro strips to the underside of a desk or back of a hutch to keep them neatly out of view.

How do you cover exposed wires outside?

Use pipe straps — small, half-circle hooks — that you can place over the conduit and then screw to the wall of your home to hold the conduit in place. Attach a pipe strap over the conduit to the wall every 6 feet, using masonry screws to attach to brick walls or siding screws for siding attachment.

How do you hide electrical cords in the middle of the room?

For cords that are still exposed, be sure you weight them down with a rubber cord cover (you can hide that further by applying contact paper, like wood-grain). Use baseboard clips or wall clips to affix cords to the wall or floor. It will help hide cords further and help eliminate tripping hazards.

Should cables be protected in walls?

All cables should either be contained in steel conduit or protected by 30mA RCD. If these two cannot be met, then the cables should be installed at least 50mm (2″) from the surface.

How do you hide electrical cords on hardwood floors?

Unlike the flexible plastic cord protectors that you’re trying to avoid, ChordSavers are rigid, grip the floor without adhesives, and are, well… attractive. Using a ChordSaver is easy – just separate the flat base from its arched “wood” cover, lay a few cables across it, and then snap the cover back on.

How do you hide cables in office?

Use the space underneath your desk to your advantage (desk organizers). Place a table lamp or floor lamp near your office area to draw your guests’ eyes away from your desk and cables. You can also hang wires and cables along a wall behind your desk using cable clamps, twist locks, or mounting bases.

How do you hide an extension cord?

There’s no need to drill a hole in your wall to hide the TV cords. Just wrap the cords together with zip ties, then corral them in an off-white piece of cloth (or a color that matches your walls) and voila — it blends in perfectly!