Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.

Can pegboard hold shovels?

2. Wall storage tools: Pegboard. Wall-Mounted Racks can hold wheelbarrows, ladders, leaf blowers, and long-handled tools, including rakes, shovels, and brooms.

Can you hang bike on pegboard?

The heavy duty pegboard hook pair is also a great pegboard accessory for bicycles. These heavy duty pegboard hooks are also ideal pegboard hooks for use in trailers due to the hook shape that prevents items from sliding off the heavy-duty peg hook while the trailer is in motion.

How thick should a pegboard be?

Pegboard Specs

1. Small hole pegboard is usually 1/8-in. -thick hardboard with 3/16-in. -dia. holes. The holes will accommodate only the smaller 1/8-in. pegs.
2. Large hole pegboard is usually 1/4-in. -thick hardboard with 1/4-in. -dia. holes that will accept 1/8-in. and 1/4-in. hooks.

Are peg boards sturdy?

A strong and sturdy kit of metal pegboards is designed to hold large items like rakes and shovels along with smaller gardening tools and products.

How much weight can a pegboard hold?

Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.

Can I hang garden tools on a pegboard?

Hang Garden Hand Tools On Pegboard For the garden tools with holes in the handles, simply use a straight hook. For garden tools without holes, you can place 2 straight hooks in adjacent pegboard holes and hook the blade of the garden tool over them (like the 2 shovels in the second row).

How thick are pegboard furring strips?

Cut and Prepare the Pegboard and Furring Strips Buy pegboard sheets of at least 1/4-in. thickness.

Can you Mount pegboard on drywall?

Pegboard goes up pretty easily and can be installed over drywall or even bare studs (such as in an unfinished garage). The trick to installing it is to create a 1/2-inch or larger gap between the wall and the back of the pegboard.

What size dowel fits in pegboard?

Doweling at that small diameter should not be too long or else it could snap under excess weight. Cut each piece no longer than 3 inches. Wider tools may require a slightly longer peg, but cut those pieces separately. Most tools will be well supported with 3-inch dowel.

Is pegboard any good?

A wood pegboard may be worth the extra cost if you plan on hanging one inside your home instead of in the garage. Metal pegboards are usually made of aluminum or stainless steel. Because of how heavy these panels are, they’re strong enough to hold large tools.

How do you keep pegboards from falling out of pegs?

To ensure hooks won’t fall out of your board, you have 4 options:

1. Get the perfect hooks with double peg attachment and appropriate thickness for your board.
2. Use metal wire to secure thin hooks.
3. Use glue or a zip tie to secure the thin hooks to your board.
4. Use plastic peg locks.

What can I use instead of peg board?

Plywood. Bolt plywood to the wall where you need to hang items for easy access. Sheets of plywood can be cut to any size and bolted to the wall to form an inexpensive pegboard alternative. Tools are then hung on nails instead of hooks.