Safety Precautions Concrobium Mold Control does not contain any VOCs and does not off-gas. However, if you’re in an area with heavy mold growth, a mask would be a good idea to limit your inhalation of harmful mold spores. If fogging, it’s a good idea to avoid breathing in excessive moisture from the fog.

What is Concrobium made out of?

Concrobium Mold Control is a patented solution comprised of purified water, sodium carbonate (washing soda), sodium bicarbonate (baking soda), and trisodium phosphate. Together, this unique, tri-salt (three salts) polymer is intensely alkaline (not acidic), which holds great advantage over mold.

How long does it take for Concrobium to work?

Drying time depends on humidity levels and temperature in the area as well as the surface to which the solution was applied. Generally it will dry in less than 2 hours. If you are painting on top of the Concrobium Mould Control application you should allow 24 hours of drying time.

Does Concrobium kill toxic mold?

Concrobium Mold Control is a versatile product that will work well on a variety of different materials and surfaces. It can effectively eliminate mold and then it helps to prevent the mold from returning by creating an invisible shield or barrier.

Is Concrobium better than bleach?

Besides the fact that bleach is an irritant and toxic, it only works to kill mould reliably on hard, non-porous surfaces. Concrobium also provides residual anti-mould action, which is something that bleach doesn’t do.

How do you make Concrobium?

DIY Concrobium knock-off formula:

1. 1 quart hot water.
2. 1 tablespoon baking soda (sodium bicarbonate)
3. 2 tablespoons washing soda (sodium carbonate)
4. 2 tablespoons TSP (trisodium phosphate)

Does Concrobium work on black mold?

While it is still safer to physically remove mold, Concrobium encapsulates mold and then dries it out rendering it “dead.” I’ve used it in the past successfully and would use it again in the future.

What permanently kills mold?

Simply mix one part bleach to four parts water. Using a damp cloth gently scrub and wipe the mould until the mould is gone. Once finished, dry the area well with a soft cloth.

Does Concrobium remove mold stains?

Concrobium Mold Stain Remover delivers exceptional mold stain removal with no brushing, sanding or blasting. That helps professional restoration contractors reduce labor costs and complete jobs more quickly.

How do you clean mold off of Concrobium?

Works on

1. Apply Concrobium Mold Control in a thin, even layer over the affected surface.
2. Allow to dry completely.
3. With a Concrobium dampened cloth or brush, scrub the surface to clean away any remaining mold stains and residue.
4. To protect against future mold growth, reapply Concrobium Mold Control on vulnerable surfaces.

Is Concrobium toxic to breathe?

Concrobium Mold Control does not contain any VOCs and does not off-gas. However, if you’re in an area with heavy mold growth, a mask would be a good idea to limit your inhalation of harmful mold spores. If fogging, it’s a good idea to avoid breathing in excessive moisture from the fog.

How do I get rid of mycotoxins in my house?

Killing Mycotoxins

1. Sodium Hypochlorite has been found to kill trichothecene and other mycotoxins.
2. Extreme heat (fire at 500°F for half-hour) can destroy trichothecene mycotoxins.
3. Ozone can kill most mycotoxins, but the level needed is not safe for humans.

Does Concrobium kill Aspergillus?

EPA standard to validate efficacy of product to control mold and fungal growth on articles or surfaces composed of fabric. Challenge organisms: Aspergillus niger, ATCC 6275 and Penicillium variabile, ATCC 32333. Achieved >99.9% kill level.

What is the best mould killer?

Best mould sprays

1. Astonish Mould & Mildew Remover. The very best mould spray, bar none.
2. HG Mould Spray. The best mould spray for bathrooms.
3. Blitz That Mould Brush-On Mould Remover Gel. Ideal for targeting hard to reach areas.
4. Cif Perfect Finish Mould Stain Removal Spray.
5. Ecozone Mould Remover.

What is the best way to get rid of mould?

One-part bleach to four parts water is an effective mould and mildew killer. Use a cloth or rag to help clean the mould away and dispose of it in a bag after using it to prevent spreading mould to another part of your home.